> For the complete documentation index, see [llms.txt](https://doc.sysdevmobile.com/kalipso/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://doc.sysdevmobile.com/kalipso/6.0/documentation/actions/group-barcode/cortex-scan-set-property.md).

# Cortex Scan Set Property

Sets different properties and behaviours for Cortex Scan.

Action available for the following operating systems:

<figure><img src="https://1102213384-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FM6Wz3tBjSWbCweZ8NltT%2Fuploads%2F6oxmptibsT6vFJwbhrM0%2F03_Supported_OS_android_ios.png?alt=media&amp;token=5a2eaa5b-19c9-4b33-882c-c815374e63b7" alt="OS Supported: Android, iOS"><figcaption></figcaption></figure>

### Parameters

* **Auto Focus Reset Mode** (Android Only) \<numeric>
  * 0 - Off
  * 1 - By Time Interval
  * 2 - By Frame Count
* **Camera Facing** \<numeric>
  * 1 - Back
  * 2 - Front
* **Decode Resolution** \<numeric>
  * 1 - 640x480
  * 2 - 1280x720
  * 3 - 1920x1080
  * 4 - 3840x2160
  * 5 - 352x288 (iOS only)
  * 6 - 2592x1936 (iOS only)
* **Decoder Security Level** \<numeric>
  * 0 - Most agressive
  * 1 - Reduced aggressiveness for poor quality 1D barcode
  * 2 - Lowest aggressiveness to avoid mis-decode of poor 1D barcode
  * 3 - Conditions signal quality of CR4300 mode
  * 11 - Reduced aggressiveness for low resolution 1D barcode
  * 12 - Lowest aggressiveness to avoid mis-deode of low resolution 1D barcode
  * 21 - Attempt to correct and decode poorly printed characters.
* **DPM Mode** \<numeric>
  * 0 - Disabled
  * 1 - Dark on Light
  * 2 - Light on Dark
  * 3 - Laser
* **Flash Light** \<numeric>
  * 1 - On
  * 2 - Off
  * 3 - Auto (iOS)
* **Focus** \<numeric>
  * 0 - Auto
  * 1 - Near
  * 2 - Far
* **Low Contrast Decoding** \<numeric>
  * 1 - Enable
  * 2 - Disable
* **Multi-Barcode Count** \<numeric>
* **Multi-Barcode Mode** \<numeric> - Exactly 'Multi-Barcode Count' property barcodes Between 1 and 'Multi-Barcode Count' property.
* **Multi-Barcode Separator** \<numeric> - The control, variable or a string that represents a XML file.
* **Scan Beep** \<numeric>
  * 1 - Enable
  * 2 - Disable
* **Scan Vibrate** \<numeric>
  * 1 - Enable
  * 2 - Disable
* **Zoom** \<numeric>

{% hint style="info" %}
The parameter Items Separator is coded.
{% endhint %}