> For the complete documentation index, see [llms.txt](https://doc.sysdevmobile.com/kalipso/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://doc.sysdevmobile.com/kalipso/6.0/documentation/actions/group-rfid/intermec-read-tag-text.md).

# Intermec Read Tag Text

Read a Intermec Tag Text.

Action available for the following operating systems:

<figure><img src="https://1102213384-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FM6Wz3tBjSWbCweZ8NltT%2Fuploads%2FaPaSg1s0pXSPKDoUxr88%2F14_Supported_OS_oldWin.png?alt=media&amp;token=ff5087fb-9e10-49f1-9fc6-cd935f3f739a" alt="OS Supported: Win32"><figcaption></figcaption></figure>

### Parameters

*Addressing*

* **Byte Address** *\<numeric> -* The begin of address where the read of data begins (example: if user specify 30 in this parameter, this action will read the specified number of bytes begining in byte/block 30).

*Read*

* **Coded** *\<unquoted string> -* Indicates if the readed data is coded or not. The possible values are:
  * Yes
  * No
  * Dynamic
* **Bytes** *\<numeric>* - Indicates the number of bytes to read.
* **Target** *\<unquoted string> -* The control or variable to save the data readed in this action.
* **From Tag** - User choose one of the following parameters:
  * **Tag ID** *\<numeric> -* The identification of the Tag ID.
  * **EPC ID** *\<numeric> -* The identification of the EPC ID.
  * **Byte Address** *\<numeric> -* The address of the byte to read. User must indicate also if the readed value is coded or not, and the value (variable) to be readed.