> For the complete documentation index, see [llms.txt](https://doc.sysdevmobile.com/kalipso/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://doc.sysdevmobile.com/kalipso/6.0/documentation/actions/group-rfid/nordic-id-rfid-read-tag.md).

# Nordic ID RFID Read Tag

Reads a Nordic ID Tag data.

Action available for the following operating systems:

<figure><img src="https://1102213384-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FM6Wz3tBjSWbCweZ8NltT%2Fuploads%2FaPaSg1s0pXSPKDoUxr88%2F14_Supported_OS_oldWin.png?alt=media&amp;token=ff5087fb-9e10-49f1-9fc6-cd935f3f739a" alt="OS Supported: Win32"><figcaption></figcaption></figure>

### Parameters

* **Memory Bank** *\<unquoted string> -* Defines the memory bank to this read action. The possible values are:
  * EPC
  * User Memory (only for EPCG1C2)
  * Reserved
  * TagID
  * Dynamic
* **Block/Address** *\<numeric> -* The block/addres to begin the read of data. Define block for HF or address for UHF.
* **Coded** *\<unquoted string> -* Indicates if the readed data is coded or not. The possible values are:
  * Yes
  * No
  * Dynamic
* **Block Count/ Bytes** *\<numeric> -* The number of blocks/bytes to read in this action. For HF use block and for UHF use number of bytes.
* **Target** *\<unquoted string> -* The control or variable to save the data readed in this action.