> For the complete documentation index, see [llms.txt](https://doc.sysdevmobile.com/kalipso/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://doc.sysdevmobile.com/kalipso/5.0/developing/form/actions/actions-description/group-rfid/zebra-rfid-get-configuration.md).

# Zebra RFID Get Configuration

Kalipso - Form - Actions - Actions Description - Group RFID - Zebra RFID Get Configuration

Get Zebra RFID Configurations.

Action available for the following operating systems:

![](https://3821468174-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LrTlA1suFa5N48x_83N%2F-McsX314mrjQ3P9-BQN7%2F-McsYNWc88h_Sm8kJQcc%2FAndroid%20e%20Windows.PNG?alt=media\&token=d553ed95-e59a-4cc6-9d43-64d113182e78)

### Parameters

* **Target Antenna Receive Sensitivity Table** *\<string> -* This is a list of values that the antenna supports for the "Receive Sensitivity". This value is in dB relative to the maximum sensitivity
* **Target Antenna Receive Sensitivity Index** *\<numeric> -* This indicates in the previous parameter which is the current active setting by indicating the index.
* **Target Antenna Transmit Power Table** *\<string> -* This is a list of values that the antenna supports for the "Transmit power". Transmit power values expressed in dBm\*100.
* **Target Antenna Transmit Power Index** *\<numeric> -* This indicates in the previous parameter which is the current active setting by indicating the index.
* **Target Antenna Transmit Frequency Table** *\<numeric> -* This is a list of values that the antenna supports for the "Transmit Frequency".
* **Target Antenna Transmit Frequency Index***\<numeric> -* This indicates in the previous parameter which is the current active setting by indicating the index.
* **Target Tag Population** *\<numeric> -* This returns the current Tag Population setting for inventory operations.
* **Target Inventory&#x20;*****Session** \<numeric> -* This returns the current Session to be used for inventory operations.
* **Target Region Table** *\<numeric> -* This is a list of values of supported regions.
* **Target Region Index***\<numeric> -* This indicates in the previous parameter which is the current active setting by indicating the index.