> For the complete documentation index, see [llms.txt](https://doc.sysdevmobile.com/kalipso/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://doc.sysdevmobile.com/kalipso/5.0/developing/form/actions/actions-description/group-rfid/zebra-rfid-gpio.md).

# Zebra RFID GPIO

Kalipso - Form - Actions - Actions Description - Group RFID - Zebra RFID GPIO

This action is use to manage the General Purpose Input/Output ports.

Action available for the following operating systems:

![](https://3821468174-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LrTlA1suFa5N48x_83N%2F-McsX314mrjQ3P9-BQN7%2F-McsYNWc88h_Sm8kJQcc%2FAndroid%20e%20Windows.PNG?alt=media\&token=d553ed95-e59a-4cc6-9d43-64d113182e78)

### Parameters

* **Operation Type** *- **Set GPI State*** - Allow to enable or disable a general purpose input port (GPI).
  * **Port Number** *\<numeric>* - The input port number to set the state.
  * **Enabled** *\<string*> - If the speciifyed input port is to be enabled or disabled.<br>
* **Operation Type** *- **Get GPI State*** - Allow to determine if a general purpose input port (GPI) is enabled or disabled and its current state (low/high).
  * **Port Number** *\<numeric>* - The input port number to set the state.
  * **Target Enabled** *\<numeric>* - Will get 1 if this port is currently enabled and 0 if it is disabled.
  * **Target State***\<numeric>* - Will get 1 if this port is currenytly high (true) and 0 if it is low (false).<br>
* **Operation Type** *- **Get GPI Event Info*** - This should be used inside the event "RFID GPI State" and is triggered when an enabled GPI port state changes from low to high or vice-versa.
  * **Target Port Number** *\<numeric>* - The input port number that triggered this event due to a state change.
  * **Target State** *\<numeric>* - The new state of the GPI port.<br>
* **Operation Type** *- **Set GPO State*** - This allows to change the sate of a general purpose output port (GPO) to high (true) or low (false).
  * **Port Number** *\<numeric>* - The input port number to set the state.
  * **State** *\<numeric>* - The new state for the output port o-Low(false) or 1-High(true).<br>
* **Operation Type** *- **Get GPO State*** - This allows to get the current sate of a general purpose output port (GPO).
  * **Port Number** *\<numeric>* - The output port number to get the state.
  * **State** *\<numeric>* - This will get the current state of the output port to 0 if low(false) or 1 if high(true).