# Test Application

If you already have KClient installed on your iOS device you can start to test your applications.

![](/files/-M7Dg1MEKCcSunmTpAZL)

Now you need to set up the KClient with the same setting of MIS Communicator and then Sync

Go to Hamburger Buttom > Communication Settings

![](/files/-M7DgEQVbWF_iFMy2dyL)

Fill in the same Settings and the Terminal Number set up at Kalipso.

![](/files/-M7DgNmLQy2lg9qkPhgS)

Press TEST CONNECTION

![](/files/-M7DgUlemdoW2j3vbzbT)

Now Save and go back and press the Sync Button.

![](/files/-M7DgcfO787iVoXAjY0n)

![](/files/-M7DggLVlxuNpo4pSM24)

![](/files/-M7Dgj84Pa86kRmklQHM)

Now you can test your project in your iOS Device.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://doc.sysdevmobile.com/kalipso-ios-deployment/testing/kclient/test-application.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.