> For the complete documentation index, see [llms.txt](https://doc.sysdevmobile.com/kalipso5/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://doc.sysdevmobile.com/kalipso5/developing/form/actions/actions-description/group-rfid/intemec-write-tag-text.md).

# Intemec Write Tag Text

Kalipso - Form - Actions - Actions Description - Group RFID - Intemec Write Tag Text

Read a Intermec Tag Text.

Action available for the following operating systems:

![](https://3821468174-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-LrTlA1suFa5N48x_83N%2Fuploads%2F96QT0XRRMpacimxCfDMo%2FWindows%20Old.PNG?alt=media\&token=a5a8e01e-2acf-4758-888e-d1d90e149b12)

### Parameters

*Addressing*

* **Byte Address** *\<numeric> -* The begin of address where the write of data begins (example: if user specify 30 in this parameter, this action will read the specified number of bytes begining in byte/block 30).

*Value*

* **Coded** *\<unquoted string> -* Indicates if the writed data is coded or not. The possible values are:
  * Yes
  * No
  * Dynamic
* **Bytes** *\<numeric>* - Indicates the number of bytes to write.

*Into Tag*

* **Tag ID** *\<numeric> -* The identification of the Tag ID.
* **EPC ID** *\<numeric> -* The identification of the EPC ID.
* **Byte Address** *\<numeric> -* The address of the byte to write. User must indicate also if the writed value is coded or not, and the value (variable) to be writed.