RFID Write Tag
Kalipso - Form - Actions - Actions Description - Group RFID - RFID Write Tag
Writes data to a memory bank of a single RFID tag.
Action available for the following operating systems:
Parameters
General
Address
Memory Bank <string>
-1 - EPC ID Content
0 - Reserved
1 - EPC
2 - TID
3 - User
Start Adderss <numeric> - The start address on the memory bank for the write operation. Usually this number must be a multiple of 2, but it may vary depending on the RFID reader or tag.
Data <string> - The data in hexadecimal format to write to the memory bank. Usually the length of this, in bytes, must be a multiple of 2, but it may vary depending on the RFID reader or tag.
Details
Access Password <string>
User Parameters <string>
Targets
Tag ID <variable or control>
Target RSSI <variable or control>
Target Scaled RSSI <variable or control>
Items Frequency <variable or control>
Target Antenna ID <variable or control>
Target Value <variable or control>
Target User Data <variable or control>
Filter
Apply Filter <string>
1 - Yes
2 - No
Memory Bank <string>
-1 EPC ID Content
0 Reserved
1 EPC
2 TID
3 User
Mask Value <string> - Hexadecimal
Bit Position <numeric> - Index of the first Bit to apply mask.
Bit Lenght <numeric> - Number of Bits to use in the mask.
Last updated