RFID Get Tag List
Kalipso - Form - Actions - Actions Description - Group RFID - RFID Get Tag List
Get a list of Tags that are in range. The value to read from the Tag can be selected in the Return and Tags can also be filtered. This is equivalent to running an inventory for 2 or 3 seconds.
Action available for the following operating systems:
Parameters
General
Targets
Tag Id List <unquoted string> - The list of the ID's of the tags found.
Target for RSSI<numeric> - The list of the RSSI values for each of the tags found.
Target Scaled RSSI List <variable or control> - The list of the Scaled RSSI (0% to 100%) values for each of the tags found.
Items Frequency List <variable or control>
Target Antenna ID List <variable or control>
Target Value List <variable or control>
Target User Data List <variable or control>
Target Number of Tags <variable or control>
Return
Items Separator <string> CR
Details
User Parameters <string>
Filter
Apply Filter <string>
1 - Yes
2 - No
Memory Bank <string>
-1 EPC ID Content
0 Reserved
1 EPC
2 TID
3 User
Mask Value <string> - Hexadecimal
Bit Position <numeric> - Index of the first Bit to apply mask.
Bit Lenght <numeric> - Number of Bits to use in the mask.
Return
ID to Return <numeric>
-1 - EPCID
0 - Reserved Memory Bank
1 - EPC Memory Bank
2 - TagID Memory Bank
3 - User Memory Bank
10 - EPCID + Reserved Memory Bank
11 - EPCID + EPC Memory Bank
12 - EPCID + TID Memory Bank
13 - EPCID + User Memory Bank
Start Address <numeric>
Number of Bytes <numeric>
Last updated