> For the complete documentation index, see [llms.txt](https://doc.sysdevmobile.com/kalipso5/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://doc.sysdevmobile.com/kalipso5/developing/form/actions/actions-description/group-rfid/jet-writetag-text.md).

# JET WriteTag Text

Kalipso - Form - Actions - Actions Description - Group RFID - JET Write Tag Text

Write a JET Tag Text.

Action available for the following operating systems:

![](https://3821468174-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F-LrTlA1suFa5N48x_83N%2Fuploads%2F96QT0XRRMpacimxCfDMo%2FWindows%20Old.PNG?alt=media\&token=a5a8e01e-2acf-4758-888e-d1d90e149b12)

### Parameters

*Addressing*

* **Byte Mode** *\<checkbox> -* Indicates if the user wants to write in a byte mode or in a block mode. If the user chooses Yes, the write action will be in a byte mode, if user chooses No, the wirte action will be in a block mode.
* **Address** *\<numeric> -* The begin of address where the read of data begins (example: if user specify 30 in this parameter, this action will write the specified number of bytes begining in byte/block 30).

**Writing**

* **Coded** *\<unquoted string> -* Indicates if the data to write is coded or not. The possible values are: Yes, No or dynamic.
* **Value** *\<string> -* The data to write in the JET Tag.