RFID Read Tag

Kalipso - Form - Actions - Actions Description - Group RFID - RFID Read Tag

Reads data from a memory bank on a tag. The value to read from the Tag can be selected in the Return and Tags can also be filtered.

Action available for the following operating systems:

Parameters

General

• Address

  • Memory Bank <string>

    • 0 - reserved

    • 1 - EPC

    • 2 - TID

    • 3 - User

  • Start Adderss <numeric> - The start address on the memory bank for the read operation. Usually this number must be a multiple of 2, but it may vary depending on the RFID reader or tag.

  • Nbr. if Bytes <numeric> - The number of bytes to read. Usually this number must be a multiple of 2, but it may vary depending on the RFID reader or tag.

• Details

  • Access Password <string>

  • User Parameters <string>

• Targets

  • Tag ID <variable or control>

  • Target RSSI <variable or control>

  • Target Scaled RSSI <variable or control>

  • Items Frequency <variable or control>

  • Target Antenna ID <variable or control>

  • Target Value <variable or control> - This target will receive the data read in Hexadecimal format. The other parameters will be returned when available and implemented for the specific reader.

  • Target User Data <variable or control>

Filter

• Apply Filter <string>

  • 1 - Yes

  • 2 - No

• Memory Bank <string>

  • -1 EPC ID Content

  • 0 Reserved

  • 1 EPC

  • 2 TID

  • 3 User

• Mask Value <string> - Hexadecimal

• Bit Position <numeric> - Index of the first Bit to apply mask.

• Bit Length <numeric> - Number of Bits to use in the mask.