# Group Barcode | **Subgroup** | **Action** | **Description** | | ------------ | ------------------------------------------------------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------- | | Barcode | [Barcode Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/barcode-connect.md) | Connects to a Barcode device. | | Barcode | [Barcode Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/barcode-disconnect.md) | Disconnects from a Barcode device. | | Barcode | [Barcode Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/barcode-enable.md) | Enables a Barcode device. | | Barcode | [Barcode Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/barcode-disable.md) | Disables a Barcode device. | | Barcode | [Barcode Scan](/kalipso5/developing/form/actions/actions-description/group-barcode/barcode-scan.md) | Scans a barcode with a Barcode device. | | Barcode | [Barcode Set Enabled Symbologie](/kalipso5/developing/form/actions/actions-description/group-barcode/barcode-set-enabled-symbologie.md) | Sets the enabled symbologies for the Barcode device. | | Barcode | [Barcode Get Enabled Symbologie](/kalipso5/developing/form/actions/actions-description/group-barcode/barcode-get-enabled-symbologie.md) | Gets a list of the enabled symbologies for the Barcode device. | | Barcode | [Barcode Set Parameter](/kalipso5/developing/form/actions/actions-description/group-barcode/barcode-set-parameter.md) | Sets a parameter on the barcode engine. | | Barcode | [Barcode Get Parameter](/kalipso5/developing/form/actions/actions-description/group-barcode/barcode-get-parameter.md) | Gets a parameter from the barcode engine | | | | | | Cortex Scan | [Cortex Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/cortex-scan-connect.md) | Connects to Cortex Scan. | | Cortex Scan | [Cortex Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/cortex-scan-disconnect.md) | Disconnects Cortex Scan. | | Cortex Scan | [Cortex Scan Set Camera Preview](/kalipso5/developing/form/actions/actions-description/group-barcode/cortex-scan-set-camera-preview.md) | Cortex Scan Set Camera Preview allow you to preview the camera inside your application and read the barcode at the same time. | | Cortex Scan | [Cortex Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/cortex-scan-enable.md) | Enables a Cortex Scan. | | Cortex Scan | [Cortex Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/cortex-scan-disable.md) | Disables a Barcode device. | | Cortex Scan | [Cortex Scan Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/cortex-scan-scan-barcode.md) | Scans a barcode with Cortex Scan. | | Cortex Scan | [Cortex Scan Set Enabled Symbol](/kalipso5/developing/form/actions/actions-description/group-barcode/cortex-scan-set-enabled-symbol.md) | Sets the enabled symbologies for Cortex Scan. | | Cortex Scan | [Cortex Scan Get Enabled Symbol](/kalipso5/developing/form/actions/actions-description/group-barcode/cortex-scan-get-enabled-symbol.md) | Gets a list of the enabled symbologies for Cortex Scan. | | Cortex Scan | [Cortex Scan Set Property](/kalipso5/developing/form/actions/actions-description/group-barcode/cortex-scan-set-property.md) | Sets different properties and behaviours for Cortex Scan. | | Cortex Scan | [Cortex Scan Get Property](/kalipso5/developing/form/actions/actions-description/group-barcode/cortex-scan-get-property.md) | Gets the different properties of Cortex Scan. | | | | | | Zebra | [Zebra Scan Enum Devices](/kalipso5/developing/form/actions/actions-description/group-barcode/zebra-scan-enum-devices.md) | Gets a list of the Zebra Scan devices. | | Zebra | [Zebra Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/zebra-scan-connect.md) | Connects to a Zebra Scan device. | | Zebra | [Zebra Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/zebra-scan-disconnect.md) | Disconnects from a Zebra Scan Device. | | Zebra | [Zebra Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/zebra-scan-enable.md) | Enables a Zebra Scan device. | | Zebra | [Zebra Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/zebra-scan-disable.md) | Disables a Zebra Scan device. | | Zebra | [Zebra Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/zebra-scan-barcode.md) | Scans a barcode with a Zebra Scan device. | | Zebra | [Zebra Scan Set Enabled Symbologies](/kalipso5/developing/form/actions/actions-description/group-barcode/zebra-scan-set-enabled-symbologies.md) | Sets the enabled symbologies for the Zebra Scan device. | | Zebra | [Zebra Scan Get Enabled Symbologies](/kalipso5/developing/form/actions/actions-description/group-barcode/zebra-scan-get-enabled-symbologies.md) | Gets a list of the enabled symbologies for the Zebra Scan device. | | | | | | Honeywell | [Honeywell Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/honeywell-scan-connect.md) | Connects to a Honeywell Scan device. | | Honeywell | [Honeywell Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/honeywell-scan-disconnect.md) | Disconnects from a Honeywell Scan device. | | Honeywell | [Honeywell Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/honeywell-scan-enable.md) | Enables a Honeywell Scan device. | | Honeywell | [Honeywell Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/honeywell-scan-disable.md) | Disables a Honeywell Scan device. | | Honeywell | [Honeywell Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/honeywell-scan-barcode.md) | Scans a barcode with a Honeywell Scan device. | | Honeywell | [Honeywell Scan Set Enabled Symbologies](/kalipso5/developing/form/actions/actions-description/group-barcode/honeywell-scan-set-enabled-symbologies.md) | Sets the enabled symbologies for the Honeywell Scan device. | | Honeywell | [Honeywell Scan Get Enabled Symbologies](/kalipso5/developing/form/actions/actions-description/group-barcode/honeywell-scan-get-enabled-symbologies.md) | Gets a list of the enabled symbologies for the Honeywell Scan device. | | | | | | CipherLab | [CipherLab Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/cipherlab-scan-connect.md) | Connects to a CipherLab Scanner (check CipherLab’s ‘Reader DLL’ Documentation). | | CipherLab | [CipherLab Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/cipherlab-scan-disconnect.md) | Disconnects from a CipherLab Scanner (check CipherLab’s ‘Reader DLL’ Documentation). | | CipherLab | [CipherLab Get Scanner Type](/kalipso5/developing/form/actions/actions-description/group-barcode/cipherlab-get-scanner-type.md) | Gets the CipherLab’s Scanner Type (check CipherLab’s ‘Reader DLL’ Documentation). | | CipherLab | [CipherLab Reset Scanner](/kalipso5/developing/form/actions/actions-description/group-barcode/cipherlab-reset-scanner.md) | Resets the CipherLab Scanner (check CipherLab’s ‘Reader DLL’ Documentation). | | CipherLab | [CipherLab Read Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/cipherlab-read-barcode.md) | Reads a Barcode with a CipherLab Scanner (check CipherLab’s ‘Reader DLL’ Documentation). | | CipherLab | [CipherLab Set Scanner Preferences](/kalipso5/developing/form/actions/actions-description/group-barcode/cipherlab-set-scanner-preferences.md) | Sets the scanner preferences of a CipherLab Scanner (check CipherLab’s ‘Reader DLL’ Documentation). | | CipherLab | [CipherLab Set Symbology Options](/kalipso5/developing/form/actions/actions-description/group-barcode/cipherlab-set-symbology-options.md) | Sets the symbology options for a CipherLab Scanner (check CipherLab’s ‘Reader DLL’ Documentation). | | CipherLab | [Cipherlab Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/cipherlab-scan-enable.md) | Enables a Cipherlab Scan device. | | CipherLab | [Cipherlab Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/cipherlab-scan-disable.md) | Disables a Cipherlab Scan device. | | | | | | Intermec | [Intermec Scan Enum Device](/kalipso5/developing/form/actions/actions-description/group-barcode/intermec-scan-enum-device.md) | Gets a list of the Intermec Scan devices. | | Intermec | [Intermec Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/intermec-scan-connect.md) | Connects to a Intermec Scan device. | | Intermec | [Intermec Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/intermec-scan-disconnect.md) | Disconnects from a Intermec Scan Device. | | Intermec | [Intermec Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/intermec-scan-enable.md) | Enables a Zebra Scan device. | | Intermec | [Intermec Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/intermec-scan-disconnect.md) | Disables a Intermec Scan device. | | Intermec | [Intermec Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/intermec-scan-barcode.md) | Scans a barcode with a Intermec Scan device. | | Intermec | [Intermec Scan Set Enabled Symbologies](/kalipso5/developing/form/actions/actions-description/group-barcode/intermec-scan-set-enabled-symbologies.md) | Sets the enabled symbologies for the Intermec Scan device. | | Intermec | [Intermec Scan Get Enabled Symbologies](/kalipso5/developing/form/actions/actions-description/group-barcode/intermec-scan-get-enabled-symbologies.md) | Gets a list of the enabled symbologies for the Intermec Scan device. | | Intermec | [Intermec Scan Send Configuration Command](/kalipso5/developing/form/actions/actions-description/group-barcode/intermec-scan-send-configuration-command.md) | Sends a command to Intermec Scan. | | Intermec | [Intermec Scan Get Configuration Value](/kalipso5/developing/form/actions/actions-description/group-barcode/intermec-scan-get-configuration-value.md) | Gets a configuration value from Intermec Scan. | | | | | | Unitech | [Unitech Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/unitech-scan-connect.md) | Connects to a Unitech Scan device. | | Unitech | [Unitech Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/unitech-scan-disconnect.md) | Disconnects from a Unitech Scan device. | | Unitech | [Unitech Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/unitech-scan-enable.md) | Enables a Unitech Scan device. | | Unitech | [Unitech Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/unitech-scan-disable.md) | Disables a Unitech Scan device. | | Unitech | [Unitech Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/unitech-scan-barcode.md) | Scans a barcode with a Unitech Scan device. | | | | | | Psion | [Psion Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/psion-scan-connect.md) | Connects to a Psion Scan device. | | Psion | [Psion Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/psion-scan-disconnect.md) | Disconnects from a Psion Scan device. | | Psion | [Psion Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/psion-scan-enable.md) | Enables a Psion Scan device. | | Psion | [Psion Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/psion-scan-disable.md) | Disables a Psion Scan device. | | Psion | [Psion Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/psion-scan-barcode.md) | Scans a barcode with a Psion Scan device. | | Psion | [Psion Scan Set Property](/kalipso5/developing/form/actions/actions-description/group-barcode/psion-scan-set-property.md) | Sets a property in a Psion Scan device. | | Psion | [Psion Scan Get Property](/kalipso5/developing/form/actions/actions-description/group-barcode/psion-scan-get-property.md) | Gets a property in a Psion Scan device. | | | | | | Nordic ID | [Nordic ID Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/nordic-id-scan-connect.md) | Connects to a Nordic ID devices. | | Nordic ID | [Nordic ID Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/nordic-id-scan-disconnect.md) | Disconnects from a Nordic ID device. | | Nordic ID | [Nordic ID Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/nordic-id-scan-enable.md) | Enables a Nordic ID Scan device. | | Nordic ID | [Nordic ID Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/nordic-id-scan-disable.md) | Disables a Nordic ID Scan device. | | Nordic ID | [Nordic ID Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/nordic-id-scan-barcode.md) | Scans a barcode with a Nordic ID Scan device. | | Nordic ID | [Nordic ID Scan Set Enabled Symbologies](/kalipso5/developing/form/actions/actions-description/group-barcode/nordic-id-scan-set-enabled-symbologies.md) | Sets the enabled symbologies for the Nordic ID Scan device. | | Nordic ID | [Nordic ID Scan Get Enabled Symbologies](/kalipso5/developing/form/actions/actions-description/group-barcode/nordic-id-scan-get-enabled-symbologies.md) | Sets the enabled symbologies for the Nordic ID Scan device. | | Nordic ID | [Nordic ID Connect](/kalipso5/developing/form/actions/actions-description/group-rfid/nordic-id-connect.md) | Connects to a Nordic ID devices. | | Nordic ID | [Nordic ID Disconnect](/kalipso5/developing/form/actions/actions-description/group-rfid/nordic-id-disconnect.md) | Disconnects from a Nordic ID device. | | Nordic ID | [Nordic ID Get Value](/kalipso5/developing/form/actions/actions-description/group-barcode/nordic-id-get-value.md) | Gets a value from MHL Interface (check MHL User Guide). | | Nordic ID | [Nordic ID Set Value](/kalipso5/developing/form/actions/actions-description/group-barcode/nordic-id-set-value.md) | Sets a value in MHL Interface (check MHL User Guide). | | Nordic ID | [Nordic ID Execute](/kalipso5/developing/form/actions/actions-description/group-barcode/nordic-id-execute.md) | Executes a command in MHL Interface (check MHL User Guide). | | | | | | Datalogic | [Datalogic Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/datalogic-scan-connect.md) | Connects to a Datalogic Scan device. | | Datalogic | [Datalogic Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/datalogic-scan-disconnect.md) | Disconnects from a Datalogic Scan device. | | Datalogic | [Datalogic Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/datalogic-scan-enable.md) | Enables a Datalogic Scan device. | | Datalogic | [Datalogic Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/datalogic-scan-disable.md) | Disables a Datalogic Scan device. | | Datalogic | [Datalogic Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/datalogic-scan-barcode.md) | Scans a barcode with a Datalogic Scan device. | | Datalogic | [Datalogic Scan Set Enabled Symbologies](/kalipso5/developing/form/actions/actions-description/group-barcode/datalogic-scan-set-enabled-symbologies.md) | Sets the enabled symbologies for the Datalogic Scan device. | | Datalogic | [Datalogic Scan Get Enabled Symbologies](/kalipso5/developing/form/actions/actions-description/group-barcode/datalogic-scan-get-enabled-symbologies.md) | Gets a list of the enabled symbologies for the Datalogic Scan device. | | | | | | Baracoda | [Baracoda Initialize](/kalipso5/developing/form/actions/actions-description/group-rfid/baracoda-initialize.md) | Initializes a Baracoda Reader. | | Baracoda | [Baracoda Uninitialize](/kalipso5/developing/form/actions/actions-description/group-rfid/baracoda-uninitialize.md) | Closes the Baracoda Reader. | | Baracoda | [Baracoda Get Device List](/kalipso5/developing/form/actions/actions-description/group-barcode/baracoda-get-device-list.md) | Gets a list of Baracoda devices in range. | | Baracoda | [Baracoda Pair Device](/kalipso5/developing/form/actions/actions-description/group-barcode/baracoda-pair-device.md) | Pairs with specified Baracoda device. | | Baracoda | [Baracoda Unpair Device](/kalipso5/developing/form/actions/actions-description/group-barcode/baracoda-unpair-device.md) | Unpairs with specified Baracoda device. | | Baracoda | [Baracoda Is Device Paired](/kalipso5/developing/form/actions/actions-description/group-barcode/baracoda-is-device-paired.md) | Checks if a specified Baracoda device is paired. | | Baracoda | [Baracoda Connect Device](/kalipso5/developing/form/actions/actions-description/group-barcode/baracoda-connect-device.md) | Connects to a Baracoda device. | | Baracoda | [Baracoda Disconnect Device](/kalipso5/developing/form/actions/actions-description/group-barcode/baracoda-disconnect-device.md) | Disconnects a Baracoda device. | | Baracoda | [Baracoda Is Device Connected](/kalipso5/developing/form/actions/actions-description/group-barcode/baracoda-is-device-connected.md) | Checks if a specified Baracoda device is connected. | | Baracoda | [Baracoda Send Acknowledgment](/kalipso5/developing/form/actions/actions-description/group-barcode/baracoda-send-acknowledgment.md) | Sends a acknowledge message to current connected Baracoda device. | | | | | | M3 | [M3 Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/m3-scan-connect.md) | Connects to a M3 Scan device. | | M3 | [M3 Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/m3-scan-disconnect.md) | Disconnects from a M3 Scan device. | | M3 | [M3 Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/m3-scan-enable.md) | Enables a M3 Scan device. | | M3 | [M3 Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/m3-scan-disable.md) | Disables a M3 Scan device. | | M3 | [M3 Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/m3-scan-barcode.md) | Scans a barcode with a M3 Scan device. | | M3 | [M3 Scan Set Enabled Symbologie](/kalipso5/developing/form/actions/actions-description/group-barcode/m3-scan-set-enabled-symbologie.md) | Sets the enabled symbologies for the M3 Scan device. | | M3 | [M3 Scan Get Enabled Symbologie](/kalipso5/developing/form/actions/actions-description/group-barcode/m3-scan-get-enabled-symbologie.md) | Gets a list of the enabled symbologies for the M3 Scan device. | | | | | | Pidion | [Pidion Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/pidion-scan-connect.md) | Connects to a Pidion Scan device. | | Pidion | [Pidion Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/psion-scan-disconnect.md) | Disconnects from a Pidion Scan device. | | Pidion | [Pidion Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/pidion-scan-enable.md) | Enables a Pidion Scan device. | | Pidion | [Pidion Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/pidion-scan-disable.md) | Disables a Pidion Scan device. | | Pidion | [Pidion Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/pidion-scan-barcode.md) | Scans a barcode with a Pidion Scan device. | | Pidion | [Pidion Scan Set Enabled Symbologie](/kalipso5/developing/form/actions/actions-description/group-barcode/pidion-scan-set-enabled-symbologie.md) | Sets the enabled symbologies for the Pidion Scan device. | | Pidion | [Pidion Scan Get Enabled Symbologie](/kalipso5/developing/form/actions/actions-description/group-barcode/pidion-scan-get-enabled-symbologie.md) | Gets a list of the enabled symbologies for the Pidion Scan device. | | | | | | Denso | [Denso Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/denso-scan-connect.md) | Connects to a Denso Scan device. | | Denso | [Denso Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/denso-scan-disconnect.md) | Disconnects from a Denso Scan device. | | Denso | [Denso Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/denso-scan-enable.md) | Enables a Denso Scan device. | | Denso | [Denso Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/denso-scan-disable.md) | Disables a Denso Scan device. | | Denso | [Denso Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/denso-scan-barcode.md) | Scans a barcode with a Denso Scan device. | | Denso | [Denso Scan Set Enabled Symbologie](/kalipso5/developing/form/actions/actions-description/group-barcode/denso-scan-set-enabled-symbologie.md) | Sets the enabled symbologies for the Denso Scan device. | | Denso | [Denso Get Enabled Symbologie](/kalipso5/developing/form/actions/actions-description/group-barcode/denso-get-enabled-symbologie.md) | Gets a list of the enabled symbologies for the Denso Scan device. | | | | | | ACD | [ACD Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/acd-scan-connect.md) | Connects to a ACD Scan device. | | ACD | [ACD Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/acd-scan-disconnect.md) | Disconnects from a ACD Scan device. | | ACD | [ACD Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/acd-scan-enable.md) | Enables a ACD Scan device. | | ACD | [ACD Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/acd-scan-disable.md) | Disables a ACD Scan device. | | ACD | [ACD Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/acd-scan-barcode.md) | Scans a barcode with a ACD Scan device. | | ACD | [ACD Scan Set Enabled Symbologie](/kalipso5/developing/form/actions/actions-description/group-barcode/datalogic-scan-set-enabled-symbologies-1.md) | Sets the enabled symbologies for the ACD Scan device. | | ACD | [ACD Scan Get Enabled Symbologie](/kalipso5/developing/form/actions/actions-description/group-barcode/acd-scan-get-enabled-symbologie.md) | Gets a list of the enabled symbologies for the ACD Scan device. | | | | | | Point Mobile | [Point Mobile Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/point-mobile-scan-connect.md) | Connects to a Point Mobile Scan device. | | Point Mobile | [Point Mobile Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/point-mobile-scan-disconnect.md) | Disconnects from a Point Mobile Scan device. | | Point Mobile | [Point Mobile Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/point-mobile-scan-enable.md) | Enables a Point Mobile Scan device. | | Point Mobile | [Point Mobile Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/point-mobile-scan-disable.md) | Disables a Point Mobile Scan device. | | Point Mobile | [Point Mobile Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/point-mobile-scan-barcode.md) | Scans a barcode with a Point Mobile Scan device. | | Point Mobile | [Point Mobile Scan Set Enabled Symbologies](/kalipso5/developing/form/actions/actions-description/group-barcode/point-mobile-scan-set-enabled-symbologies.md) | Sets the enabled symbologies for the Point Mobile Scan device. | | Point Mobile | [Point Mobile Scan Get Enabled Symbology](/kalipso5/developing/form/actions/actions-description/group-barcode/point-mobile-scan-get-enabled-symbology.md) | Gets a list of the enabled symbologies for the Point Mobile Scan device. | | | | | | Newland | [Newland Scan Connect](/kalipso5/developing/form/actions/actions-description/group-barcode/newland-scan-connect.md) | Connects to a Newland Scan device. | | Newland | [Newland Scan Disconnect](/kalipso5/developing/form/actions/actions-description/group-barcode/newland-scan-disconnect.md) | Disconnects from a Newland Scan device. | | Newland | [Newland Scan Enable](/kalipso5/developing/form/actions/actions-description/group-barcode/newland-scan-enable.md) | Enables a Newland Scan device. | | Newland | [Newland Scan Disable](/kalipso5/developing/form/actions/actions-description/group-barcode/newland-scan-disable.md) | Disables a Newland Scan device. | | Newland | [Newland Scan Barcode](/kalipso5/developing/form/actions/actions-description/group-barcode/newland-scan-barcode.md) | Scans a barcode with a Newland Scan device. | | Newland | [Newland Scan Set Enabled Symbology](/kalipso5/developing/form/actions/actions-description/group-barcode/newland-scan-set-enabled-symbology.md) | Sets the enabled symbologies for the Newland Scan device. | | Newland | [Newland Scan Get Enabled Symbology](/kalipso5/developing/form/actions/actions-description/group-barcode/newland-scan-get-enabled-symbology.md) | Gets a list of the enabled symbologies for the Newland Scan device. | --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://doc.sysdevmobile.com/kalipso5/developing/form/actions/actions-list/group-barcode.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.